Leopard (T80)
The Leopard (T80) is a radio remote used for the controlling of electric hoists and smaller overhead cranes.
The system's stop function is approved and in accordance with the EN 954-1 category 3.
The Leopard (T80) transmits on the 433 MHz range and allows you to choose between 69 channels of transmission.
The transmitter allows you to control 2 receivers and has 10 x 2 functions. The unit has an operating time of 30 hours and has rechargeable batteries.
There are 2 versions that differ in voltage. Both have 6 function relays and 2 relays that control the stop function.
If you want to install your receiver in a small space, the receiver with the 10-pin connector is an excellent choice. It takes up less space and is very easy to install.
| TX1 | |
|---|---|
|
T80-Leopard Transmitter T80 TX1 Frequency: 433-434 MHz (69 channels) Functions: 4x2 or 6x1, on/off Power supply: Rechargeable battery Weight: Approx. 270 g Dimensions: 160 x 70 x 35 mm Protection: IP 54 |
| RX1 | |
|
T80-Leopard Receiver T80 RX1 Frequency:433-434 MHz (69 channels) Relay output: Micro: 6 + 2 for stop function Transistor output 12V max. 50 mA Safety relay: potential free, connects 8A AC1 Function relay: Potential free, breaks/connects 8A AC1 Simultaneous Instantaneous/Alternating Interlocking Power supply: 24/48/115/230V AC Dimensions: 145 x 140 x 55 mm Protection: IP65 |
| RX2 | |
|
T80-Leopard Receiver T80 RX2 Frequency: 433-434 MHz (69 channels) Relay output: Micro: 6 + 2 for stop function Transistor output 12V max. 50 mA Safety relay: potential free, connects 8A AC1 Function relay: Potential free, breaks/connects 8A AC1 Simultaneous Instantaneous/Alternating Interlocking Power supply: 12/24V DC and 24/48/115/230V AC Dimensions: 175 x 125 x 75 mm Protection: IP65 |